Our Waterproofing systems create surfaces suitable for any amount of moisture including shower pans, swimming pools, hot tubs, and any other water features you may have. These thin, waterproofing membranes provide crack isolation and prevent water penetration. They can be easily applied using a roller, trowel, or brush, and must dry for over an hour before applying mortar.
Crack isolation membranes provide a layer between the substrate and the tile. This layer absorbs the impact of pressure on the flooring to help prevent potential cracking as well as isolating the tile from shrinkage cracks. If you want another feature to reinforce the durability of your tile floors, crack isolation membranes may be a worth-while purchase.
Laticrete Hydrban
- Single component
- Flood testing in 2 hours (at above 70°)
- Equipped with microban anti bacterial product protection
- Color change from sage to an olive green
Siena Dragonskin
- Contains latex polymers & other additives
- Flood testing in 24 hours
- Color change from light purple to dark purple color
- NOT USABLE for exterior vertical installations
Omega Siena Fracture Shield
- Anti-fracture
- Crack isolation floors only
- Contains latex polymers & other additives
- White color
- Water resistant, NOT for showers, pools, etc.
Schluter Systems Ditra XL
- Membrane rollout form
- Crack isolation
- Waterproofing
- Moisture control